LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - DTC P0218 To DTC P0967) >> DTC P07A9 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Clear the DTC.
  2. Operate the vehicle from EVT 1 through 4th gear while observing the 1-3 Clutch Slip parameter. Stop the vehicle and turn the ignition OFF for 30 seconds. Perform this action 2 times. The 1-3 Clutch Slip parameter display should be greater than 0 RPM when the 1-3 Clutch Status parameter displays Released.
    • If any other transmission DTCs are set, diagnose those first.