LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - DTC P0218 To DTC P0967) >> DTC P079B >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Perform the Line Pressure Check .
  2. Perform the Control Solenoid Valve and Transmission Control Module Assembly Solenoid Performance Test .
    • If a concern is found, replace the control solenoid (w/body and TCM) valve assembly.
  3. Inspect the trans fluid pump ball check valve for possible sticking or damage.
    • If you found a concern with this check ball, repair the concern.
  4. Inspect the hybrid direct, 2-3-4 clutch regulator valve for sticking or damage.
    • If you found a concern with the hybrid direct, 2-3-4 clutch regulator valve, repair or replace the valve or valve body.
  5. Inspect the hybrid direct, 2-3-4 clutch for a slipping or damaged condition.
    • If you found a hybrid direct, 2-3-4 clutch concern, repair or replace the hybrid direct, 2-3-4 clutch assembly as necessary.
scientia non olet · About LEMON Manuals