LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System & Fuel - Hybrid (Hp2) 6.0L (LFA) - DTC P0010 To DTC P0232) >> DTC P0010 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

The ECM detects that the state of the high side driver and the state of the CMP solenoid control circuit does not match. The ECM will detect an open, high resistance, short to ground, or a short to voltage on the CMP solenoid control circuit, or an open on the low reference circuit, if the condition is present for more than 6.25 seconds.