LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Hybrid Engine Controls - DTC B008A To DTC P0AF7) >> DTC P06B1, P06B2, P06B4, or P06B5 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
  1. Clear the DTC and operate the vehicle under the condition for running and setting the DTC.
  2. Shut the ignition OFF for 30 seconds, and verify that the DTC does not reset.
    • If the DTC resets, replace the PIM.