Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
EC Ignition Relay
| Display Parameters | Normal Range | Short to Ground | Open/High Resistance | Short to Voltage |
|---|---|---|---|---|
| Operating Conditions: Ignition ON, engine OFF, powertrain relay commanded ON. | ||||
| EC Ignition Powertrain Relay Circuit Status | OK/Incomplete | Short to GRD/Open | Short to GRD/Open | Short to B+ |
| EC Ignition Powertrain Relay Command | ON | ON | ON | ON |
| EC Ignition Powertrain Relay Feedback Signal | 12-12.9 V | 0.0 V | 0.0 V | 12-12.9 V |