Torque Converter Installation: Installation
WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the torque converter.
- Install the J 21366: converter holding strap.
WARNING:
The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.
CAUTION:
Make sure that the torque converter remains installed all the way into the pump, when bolting the transmission to the engine. Damage to the pump may occur if not installed correctly.