Reaction Gear and Carrier Installation: Installation

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Reaction Carrier/Support Thrust Bearing Assembly

Courtesy of GENERAL MOTORS CORP.

Install the reaction gear support to case bearing (692) onto the internal reaction gear support (685). Retain the bearing using J 36850: transjel lubricant or equivalent.
Install the internal reaction gear (684) and the internal reaction gear support (685) into the case.
Install the reaction carrier/support thrust bearing assembly (683) into the internal reaction gear support (685). Retain bearing with J 36850: transjel lubricant.

Fig 2: Identifying Reaction Carrier Assembly

Courtesy of GENERAL MOTORS CORP.

Install the reaction carrier assembly (681) into the internal reaction gear.