LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Reaction Carrier Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Reaction Carrier Shaft Front Bushing
    GM5476Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a new reaction carrier shaft front bushing (665).
  2. Fig 2: View Of Reaction Carrier Shaft Rear Bushing
    GM5477Courtesy of GENERAL MOTORS CORP.
  3. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a reaction carrier shaft rear bushing (667).