Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools J 21465-2, J 8092 & New Stator Shaft Front Bushing

Courtesy of GENERAL MOTORS CORP.

Using the J 21465-2 which is part of J 21465-01: bushing service set (1) and the J 8092: driver handle (2), install a new stator shaft front bushing (234).

Fig 2: Identifying Special Tools J 34196-B, J 8092 & Stator Shaft Rear Bushing

Courtesy of GENERAL MOTORS CORP.

Using the J 34196-2 (1) which is part of kit J 34196-B: bushing service set and the J 8092: driver handle (2), install the stator shaft rear bushing (241).