Manual Detent Spring Installation

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Manual Detent Spring Bolt And Spring Assembly

Courtesy of GENERAL MOTORS CORP.

Inspect the manual detent spring assembly (63) for cracks or damage.
Install the manual detent spring assembly (63).

CAUTION: Refer to Fastener Caution .

Install the manual detent spring bolt (64). Tighten the bolt to 20-27 N.m (15-20 lb ft).