Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Input Sun Gear Front Bushing

Courtesy of GENERAL MOTORS CORP.

Using J 34196-4 which is part of kit J 34196-B: bushing service set with J 8092: driver handle, install the input sun gear front bushing (657).
Using J 34196-6 which is part of kit J 34196-B: bushing service set with J 8092: driver handle, install the input sun gear rear bushing (659).