LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input Housing to Output Shaft Seal Installation

Input Housing to Output Shaft Seal Installation

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Input Housing To Output Shaft Seal
GM8199Courtesy of GENERAL MOTORS CORP.

Install a new input housing to output shaft seal (636).