LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 2-4 Band Installation

2-4 Band Installation

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 2-4 Band Assembly
    GM190436Courtesy of GENERAL MOTORS CORP.
  1. Inspect the 2-4 band assembly (602) for damage or wear.
  2. Install the 2-4 band (602) into the case.
    3. Fig 2: Identifying Band Anchor Pin
    GM1552920Courtesy of GENERAL MOTORS CORP.
  3. Install the band anchor pin (41) into the case.
  4. Index the band to fit the band anchor pin into the band.
scientia non olet · About LEMON Manuals