1-2 Accumulator Disassemble

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Air To Clean Accumulator Housing

Courtesy of GENERAL MOTORS CORP.

NOTE: Some models may not use an outer 1-2 accumulator spring (54).

Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
Remove the 1-2 inner (104) and outer (54) accumulator springs.