LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Second Gear Start

Second Gear Start

WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Second Gear Start

Checks Causes
Signal Noise on Vehicle Speed Sensor (VSS) Circuit Chassis vibrations, incorrect harness routing, owner installed electronic components creating electrical interference.
Diagnostic Trouble Code (DTC) Electrical or mechanical 1-2 Shift Solenoid Valve (367) malfunction.
Leaking Actuator Feed Limit (AFL) Circuit Spacer plate (48), spacer plate gaskets (47 or 52), control valve body (60), mispositioned, damaged or poor sealing/mating surface exist.
Blocked or restricted Valve Body Spacer Plate (48) Spacer Plate to Case Gasket (47) or Spacer Plate to Valve Body Gasket (52) Trapped sediment or metal particles.
Stuck 1-2 Shift Valve (366)
  • Trapped sediment or metal particles.
  • Binding shift valve or worn valve body bore.