Third and Fourth Clutch Backing Plate Selection
WARNING: This page is about a different car, the 2009 GMC Yukon and 2009 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
3rd and 4th Clutch Backing Plate Selection Table
| Dimension |
Identification |
| 5.88-5.68 mm (0.231-0.224 in) |
A |
| 4.99-4.76 mm (0.196-0.187 in) |
B |
| 4.10-3.90 mm (0.161-0.154 in) |
C |
| Use a backing plate which gives the correct travel. The travel should be 2.10-0.90 mm (0.083-0.035 in). |