Transfer Case Two/Four Wheel Drive Actuator Position Sensor Replacement
WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Two/Four Wheel Drive Actuator Position Sensor Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 2 | Two/Four Wheel Drive Actuator Position Sensor |
| 3 | Two/Four Wheel Drive Actuator Position Sensor O-ring Seal Procedure: Lightly lubricate the O-ring with clean DEXRON® VI. |