Transfer Case Adapter Replacement

WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transfer Case Adapter, Seal & Bolt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the transfer case. Refer to Transfer Case Assembly Replacement . Remove the transmission mount. Refer to Transmission Mount Replacement (4WD) for the 4L60-E/4L65-E/4L70-E transmission, or Transmission Mount Replacement (4WD) for the 6L50/6L80/6L90 transmission.
1	Transfer Case Adapter Bolt CAUTION: Refer to Fastener Caution . Tighten: 50 N.m (37 lb ft)
2	Transfer Case Adapter
3	Transfer Case Adapter Seal Tip: Always use a new seal for the adapter. Do not use any type of sealant or adhesive in place of or with the seal.