Front Output Shaft Assembly Removal

WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transfer Case Front Half, Output Shaft Assembly & Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Front Case Half Tip: Place the front case half on an arbor press.
2	Transfer Case Front Output Shaft Assembly Tip: Press the front output shaft assembly from the front case half using an arbor press or soft-face hammer.
3	Transfer Case Front Output Shaft Seal