Input Shaft Seal and Front Output Shaft Seal Installation

WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transfer Case Assembly, Input Shaft Seal & Front Output Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Input Shaft Seal Tip: Ensure the bore of the front case half is free of dirt, oil, and cleaning solvent. Special Tools: J 42738: Seal Installer
2	Transfer Case Front Output Shaft Seal Special Tools J 8092: Driver Handle J 43484: Front Output Shaft Seal Installer
3	Transfer Case Assembly Tip: Remove from J 3289-20: holding fixture and remove the J 45759: assembly fixture from the transfer case.

Callout

Component Name

Transfer Case Input Shaft Seal
Tip: Ensure the bore of the front case half is free of dirt, oil, and cleaning solvent.
Special Tools:
J 42738: Seal Installer

Transfer Case Front Output Shaft Seal

Special Tools

J 8092: Driver Handle
J 43484: Front Output Shaft Seal Installer

Transfer Case Assembly
Tip: Remove from J 3289-20: holding fixture and remove the J 45759: assembly fixture from the transfer case.