Diagnostic Starting Point - Transfer Case
WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Begin the system diagnosis with the Diagnostic System Check - Vehicle (without HP2) . The Diagnostic System Check will provide the following information:
- The identification of the control module or modules that command the system.
- The ability of the control module or modules to communicate through the serial data circuit.
- The identification of any stored diagnostic trouble codes (DTCs) and the status of the codes.
The use of the Diagnostic System Check - Vehicle (without HP2) will identify the correct procedure for diagnosing the system and where the procedure is located.