LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC B0770 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The all wheel drive (AWD) indicator circuit consists of a light emitting diode (LED), a LED feed circuit and a LED control circuit. The indicator dimming control circuit is the LED feed circuit and continuously supplies voltage to the 2 High, Auto 4WD, 4 Low and 4 High LEDs. When the AWD mode has been selected, the transfer case shift control module (TCCM) provides a ground through the AWD indicator control circuit illuminating the LED. At key ON, the TCCM will illuminate and test each mode indicator for 2 seconds.