Front Seat Replacement - Bucket (Tahoe with HP2)

Fig 1: View Of Front Seat Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Assembly Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 90 N.m (66 lb ft)
2	Front Seat Assembly Nut (Qty: 2) Tighten: 55 N.m (41 lb ft)
3	Front Seat Assembly Procedure: Disconnect the electrical connector.