LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement

Hood Primary Latch Release Cable Replacement

Fig 1: View Of Hood Latch Release Cable & Nut
GM1670885Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the headlamps. Refer to Headlamp Replacement (Non HID) or Headlamp Replacement (Cadillac Escalade) or Headlamp Replacement (Escalade PLATINUM) or Headlamp Replacement (Tahoe, Avalanche) or Headlamp Replacement (Chrevrolet Tahoe Two-mode Hybrid) or Headlamp Replacement (Yukon) or Headlamp Replacement (GMC Yukon Two-mode Hybrid) .
  2. Remove the grille support. Refer to Radiator Grille Reinforcement Support Replacement .
  3. Remove the hood release handle. Refer to Hood Primary Latch Release Cable Handle Replacement .
1 Hood Latch Release Cable Nut
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)
2 Hood Latch Release Cable
Tip: 
  • Release the cable from the latch assembly and pull through the dash panel.
  • Attach mechanics wire to existing cable to ease installation of the new cable.
scientia non olet · About LEMON Manuals