LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade AWD V8-6.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4L65-E/4L70-E Automatic Transmission >> Assemble, Disassemble, and Installation >> Low and Reverse Clutch Plate Installation

Low and Reverse Clutch Plate Installation




Low and Reverse Clutch Plate Installation




1. Install the waved plate.
2. Install the correct selective spacer plate (from the selection procedure).
3. Install the five fiber plate assemblies and four steel plates, starting with one fiber plate assembly and alternating with steel.
4. Index the steel plate splines in the case as shown.

scientia non olet · About LEMON Manuals