Exhaust Hanger Mounting Bracket Replacement

Exhaust Hanger Mounting Bracket Replacement

Removal Procedure





1. Remove the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement (Service and Repair) .
2. Remove the upper exhaust pipe hanger bolts (1).
3. Remove the exhaust pipe hanger.



Installation Procedure





1. Install the exhaust pipe hanger.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the upper exhaust pipe hanger bolts (1).

Tighten the exhaust pipe hanger bolts to 50 N.m (37 lb ft).

3. Install the intermediate exhaust pipe. Refer to Intermediate Pipe Replacement (Service and Repair) .