LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 133. Drive Belt Tensioner Installation

133. Drive Belt Tensioner Installation



Drive Belt Tensioner Installation





1. Install the drive belt tensioner. Be sure to locate the tensioner anchor pin in the camshaft position actuator housing recess.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the drive belt tensioner bolt.

Tighten the drive belt tensioner bolt to 50 N.m (37 lb ft).



scientia non olet · About LEMON Manuals