Torque Converter Removal and Holding Fixture Installation

Fig 1: Locating Torque Converter & Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Torque Converter Assembly
2	Transmission Case Assembly Tip: Rotate the transmission so that the converter housing is up and secure with locking pin. Allow any remaining transmission fluid to drain from the case extension. Special Tools DT 47605 Holding Fixture Adapter. See Special Tools . J 3289-20 Holding Fixture Base Assembly. See Special Tools . J 8763-B Holding Fixture. See Special Tools .

Callout

Component Name

Torque Converter Assembly

Transmission Case Assembly
Tip:

Rotate the transmission so that the converter housing is up and secure with locking pin.
Allow any remaining transmission fluid to drain from the case extension.

Special Tools