Removal Procedure
- Using the J 44827
, disconnect the front transmission oil cooler (TOC) line from the rear TOC line.
- Remove the left hand (LH) front wheel. Refer to Tire and Wheel Removal and Installation
.
- Remove the LH front splash shield retainers.
- Remove the LH front splash shield.
- Using the J 44827
, disconnect the rear transmission oil cooler TOC lines from the radiator.
Courtesy of GENERAL MOTORS CORP.
- Remove the rear TOC line to transmission retainer bolt.
- Disconnect the rear TOC lines from the transmission.
- Remove and discard the O-rings.
- Remove the TOC retainer bracket bolt.
- Remove the TOC lines.