LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Pipe Replacement - Rear >> Installation Procedure

Installation Procedure

  1. Install the TOC lines.
  2. NOTE: Refer to Fastener Notice .
  3. Install the TOC retainer bracket bolt.

    Tighten:  Tighten the bolt to 16 N.m (12 lb ft).

  4. Fig 1: View Of TOC Line To Transmission Retainer Bolt
    GM1710028Courtesy of GENERAL MOTORS CORP.
  5. Install new O-rings to the rear TOC lines.
  6. Connect the rear TOC lines to the transmission.
  7. Install the rear TOC line to transmission retainer bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  8. Connect the rear TOC line to the front TOC line.
  9. Connect the rear TOC line to the radiator.
  10. Install the LH front splash shield.
  11. Install the LH front splash shield retainers.
  12. Install the LH front wheel. Refer to Tire and Wheel Removal and Installation .