Low and Reverse Clutch Piston Removal
Low and Reverse Clutch Piston Removal
| Callout | Component Name |
|---|---|
| 1 | Low and Reverse Clutch Spring Retaining Ring
NOTE:
Ensure the DT-48069 contacts the sprag assembly and not the sprag retaining ring or damage to the sprag may result. Special Tool: DT-48069 Low Clutch Spring Compressor. See Special Tools . |
| 2 | Low Clutch Sprag Assembly |
| 3 | Low and Reverse Clutch Spring |
| 4 | Low and Reverse Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston. |
| 5 | Low Clutch Sprag Seal
NOTE:
Refer to Seal Reuse Notice
.
|