Front Bumper Fascia Replacement

Fig 1: Locating Front Bumper Fasteners

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement . Remove the front air deflector. Refer to Front Air Deflector Replacement . Remove the front bumper fascia extensions. Refer to Front Bumper Fascia Extension Replacement (DW) or Front Bumper Fascia Extension Replacement (DX) .
1	Front Bumper Fascia Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 6 N.m (53 lb in)
2	Front Bumper Fascia Reinforcement Nut (Qty: 2) Tip: These nuts can be loosened. It is not necessary to entirely remove them. Tighten: 6 N.m (53 lb in)
3	Front Bumper Fascia Plastic Retainer (Qty: 4)
4	Front Bumper Fascia Tips Disconnect the radiator air baffle shields from the lower grille before removing. Disconnect all electrical connectors as needed. Transfer any parts as needed.