Rear Side Door Replacement

Fig 1: Exploded View Of Rear Side Door Bolts & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Side Door Check Link Bolt NOTE: Refer to Fastener Notice . Tip: Support the door before removing the hinge bolts. Tighten: 20 N.m (15 lb ft)
2	Rear Side Door Hinge Bolt (Qty: 2) Tighten: 35 N.m (26 lb ft)
3	Rear Side Door Hinge Bolt (Qty: 2) Procedure Support the door before removing the hinge bolts. Disconnect the door electrical connector. Tighten: 35 N.m (26 lb ft)
4	Rear Side Door Assembly Tip: When replacing the door it is necessary to transfer all of the internal components.