Antenna Control Module: Service and Repair

Television Antenna Module Replacement

Removal Procedure

1. Remove the left side sail panel. Refer to Sail Panel Replacement (Service and Repair) .




2. Disconnect the electrical connectors.
3. Remove the bolt (1) securing the antenna module to the vehicle.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the bolt (1) securing the antenna module to the vehicle.

Tighten the bolts (1) to 9 N.m (80 lb in).

2. Install the left side sail panel. Refer to Sail Panel Replacement (Service and Repair) .