Recirculation Actuator Replacement

Recirculation Actuator Replacement

Removal Procedure

1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement (Air Inlet Assembly Replacement) .




2. Disconnect the electrical connector from the recirculation actuator.




3. Remove the recirculation actuator screws (1).
4. Remove the recirculation actuator.



Installation Procedure





1. Install the recirculation actuator.

Notice: Refer to Fastener Notice .

2. Install the recirculation actuator screws (1).

Tighten the screws to 1 N.m (9 lb in).





3. Connect the electrical connector to the recirculation actuator.
4. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement (Air Inlet Assembly Replacement) .