LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS AWD V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 136. Drive Belt Idler Pulley Installation

136. Drive Belt Idler Pulley Installation



Drive Belt Idler Pulley Installation





1. Place the drive belt idler pulley in position to the engine.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the drive belt idler pulley bolt.

Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).



scientia non olet · About LEMON Manuals