Engine Mount Replacement - Right

Engine Mount Replacement - Right Side (w/AWD)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service Intervals) .
2. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/AWD) (Service and Repair)Engine Mount Bracket Replacement - Right Side (w/RWD) (Service and Repair) .




3. Remove the engine mount retaining nut.
4. Remove the engine mount from the vehicle.



Installation Procedure





1. Install the engine mount to the vehicle.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the engine mount retaining nut.

Tighten the nut to 80 N.m (59 lb ft).

3. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/AWD) (Service and Repair)Engine Mount Bracket Replacement - Right Side (w/RWD) (Service and Repair) .
4. Lower the vehicle.