Special Tools

WARNING: This page is about a different variant/trim than selected.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 2619-01 Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 22912-01 Rear Pinion and Axle Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 26941 Bushing and Bearing Remover - 3-4 inch
Courtesy of GENERAL MOTORS CORP.	J 36825 Output Shaft Oil Seal Remover (4WD Models Only)
Courtesy of GENERAL MOTORS CORP.	J 36850 Transjel Lubricant
Courtesy of GENERAL MOTORS CORP.	J 42176 Universal Driver Handle - Non-Threaded
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45124 Removal Bridge
Courtesy of GENERAL MOTORS CORP.	J-45124-9 Puller Legs
Courtesy of GENERAL MOTORS CORP.	J 45358 Case Spreader
Courtesy of GENERAL MOTORS CORP.	J 45380 Transfer Case Rear Bushing Remover and Installer
Courtesy of GENERAL MOTORS CORP.	J 45548 Mainshaft Support Bushing/Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 45756 Rear Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45757 Mainshaft Support Bushing and Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture