LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - On Vehicle >> Transfer Case Adapter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Transfer Case Adapter, Bolts & Seal
    GM652614Courtesy of GENERAL MOTORS CORP.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Remove the transmission mount. Refer to Transmission Mount Replacement (4WD) or Transmission Mount Replacement (2WD) .
  3. Remove the transfer case adapter bolts.
  4. Remove the adapter.
  5. Remove the adapter seal.
scientia non olet · About LEMON Manuals