LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - Off Vehicle >> Transfer Case Cleaning and Inspection >> Front Output Shaft

Front Output Shaft

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Front Output Shaft
    GM819682Courtesy of GENERAL MOTORS CORP.
  1. Clean the front output shaft in cleaning solvent and air dry.
  2. Inspect for spun bearings at the front output shaft bearing areas.
  3. Inspect the front output internal splines and driven gear splines for damage or excessive wear.
  4. Replace the front output shaft if it is damaged.
  5. Inspect the cup plug in the front output shaft for leaking.
  6. Replace the cup plug if it is leaking. Refer to Transfer Case Disassemble  and Transfer Case Assemble .
scientia non olet · About LEMON Manuals