Low and Reverse Clutch Piston Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Low and Reverse Clutch Piston Removal
| Callout | Component Name |
|---|---|
| 1 | Low and Reverse Clutch Spring Retaining Ring
CAUTION:
Ensure the DT 47779 contacts the sprag assembly and not the sprag retaining ring. Damage to the sprag may result. Special Tool DT 47779 Clutch Spring Compressor For equivalent regional tools, refer to Special Tools . |
| 2 | Low Clutch Sprag Assembly
NOTE:
A blue colored ring may be present on the outer splines of the low clutch sprag assembly. This is a normal condition caused by heat treating during manufacturing and does not indicate need for replacement. |
| 3 | Low and Reverse Clutch Spring |
| 4 | Low and Reverse Clutch Piston Assembly
NOTE:
It may be necessary to apply air to the apply passage in order to unseat the piston. |
| 5 | Low Clutch Sprag Seal
CAUTION:
Refer to Seal Reuse Caution . |