Timing Chain & Sprocket Replacement (LC9/LMG/LY2/LY5): Notes

Tools Required

• EN 46330  Timing Chain Tensioner Retaining Pin. See Special Tools .
• J 8433  Puller Bar. See Special Tools .
• J 41478  Crankshaft Front Oil Seal Installer. See Special Tools .
• J 41558  Crankshaft Sprocket Remover. See Special Tools .
• J 41665  Crankshaft Balancer and Sprocket Installer. See Special Tools .
• J 41816-2  Crankshaft End Protector. See Special Tools .
• J 42386-A  Flywheel Holding Tool. See Special Tools .
• J 45059  Angle Meter. See Special Tools .