Valve Rocker Arm Cover Removal - Left Side
Courtesy of GENERAL MOTORS CORP.
- Remove the spark plug wires (724).
- Remove the ignition coil bracket studs (720).
- Remove the ignition coil and bracket assembly (719).
Courtesy of GENERAL MOTORS CORP.
- Disconnect the ignition coil electrical connectors.
- Remove the bolts (723), coils (722), and wire harness (721) from the bracket (719), as required.
Courtesy of GENERAL MOTORS CORP.
- Remove the valve rocker arm cover bolts and cover.
Courtesy of GENERAL MOTORS CORP.
- Remove the gasket (504) from the cover.