LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5) >> Off-Vehicle Repair Instructions (1 Of 3) >> Oil Pump, Screen & Crankshaft Oil Deflector Removal (RPO LY6/L76/L92)

Oil Pump, Screen & Crankshaft Oil Deflector Removal (RPO LY6/L76/L92)

    Fig 1: View Of Oil Pump Screen, Bolt, Nuts, & O-Ring Seal
    GM1277115Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil pump screen bolt (405) and nuts (404).
  2. Remove the oil pump screen (407) with O-ring seal (406).
  3. Remove the O-ring seal from the pump screen.
  4. Discard the O-ring seal.
    5. Fig 2: View Of Crankshaft Oil Deflector
    GM260099Courtesy of GENERAL MOTORS CORP.
  5. Remove the remaining crankshaft oil deflector nuts.
  6. Remove the crankshaft oil deflector.
    7. Fig 3: View Of Oil Pump & Bolts
    GM1658173Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil pump bolts (411).
    8. IMPORTANT: Do not allow dirt or debris to enter the oil pump assembly. Cap ends, as necessary.
  8. Remove the oil pump (413).
scientia non olet · About LEMON Manuals