LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LY2/LY6/L92)

Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LY2/LY6/L92)

    Fig 1: View Of Engine Coolant Air Bleed Pipe Components
    GM1403313Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with seals (308).
    3. Fig 2: Identifying Coolant Air Bleed Cover Bolts
    GM1403314Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312).
  4. Remove the covers (313) with seals (308).
    5. Fig 3: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  5. Remove the seals (308) from the pipe and covers.
  6. Discard the seals.
scientia non olet · About LEMON Manuals