LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Block Cleaning & Inspection >> Inspection Procedure

Inspection Procedure

  1. Inspect the following components:
    • Cylinder walls for excessive scratches, gouging, or ring ridge
    • Cylinder bores for excessive ring ridge at the top of the cylinder
    • Coolant jacket for cracks
    • Valve lifter bores for excessive scoring or wear
    • Crankshaft bearing webs for cracks
    • Gasket sealing surfaces for excessive scratches or gouging

      Refer to Replacing Engine Gaskets .

    • Oil galleries for restrictions
    • Threaded bolt holes for damaged threads
    • Cylinder bores for excessive ring ridge at the top of the cylinder
  2. Measure the cylinder bores for an oversize condition:
scientia non olet · About LEMON Manuals