LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (2 Of 5) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Mount Replacement - Left Side (2500 w/RPO LY6) >> Installation Procedure

Installation Procedure

  1. Position the engine mount to the engine block.
    2. Fig 1: View Of Engine Mount
    GM1701901Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
    Fig 2: View Of Engine Mount To Engine Bolts
    GM1701899Courtesy of GENERAL MOTORS CORP.
  2. Working through the wheelhouse opening, install the engine mount to engine bolts (1).

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the left engine mount bracket. Refer to Engine Mount Bracket Replacement - Left Side (2500 w/RPO LY6) .
scientia non olet · About LEMON Manuals