LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (2 Of 5) >> On-Vehicle Repair Instructions (1 Of 2) >> Drive Belt Tensioner Replacement - Air Conditioning >> Installation Procedure

Installation Procedure

    Fig 1: View Of A/C Drive Belt Tensioner & Bolts
    GM1696655Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Position the A/C drive belt tensioner to the A/C compressor bracket.
  2. Install and tighten the A/C drive belt tensioner bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the A/C drive belt. Refer to Air Conditioning Compressor Belt Replacement .
scientia non olet · About LEMON Manuals