LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW With TCS & VSES >> Diagnostic Information and Procedures >> StabiliTrak Indicator Malfunction >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the traction control switch.
  2. Test for infinite resistance between the signal terminal 3 and the ground terminal 1 with the switch in the open position.
    • If not the specified value, replace the traction control switch.
  3. Test for less than 3 ohms between the signal terminal 3 and the ground terminal 1 with the switch in the closed position.
    • If greater than the specified range, replace the traction control switch.
scientia non olet · About LEMON Manuals