LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT)

Rear Seat Shoulder Belt Opening Bezel Replacement (Avalanche/Escalade EXT)

Fig 1: View Of Rear Seat Shoulder Belt Opening Bezel & Screw
GM1708143Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Rear Seat Shoulder Belt Opening Bezel Screw
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Rear Seat Shoulder Belt Opening Bezel
  1. Remove the seat belt anchor bolt and disengage the seat belt anchor from the seat frame by using a flat bladed tool.
  2. Slide the bezel along the seat belt and remove with belt assembly.